Inteligencia de instalaciones
Motor Guard
Early warning for the pumps and fans that keep animals safe.
El reto
When a life-support pump or blower stops, animals can be at risk within hours.
Motor Guard
Motors rarely fail without warning. Current creeps up, bearings run warmer and vibration grows, often for days before a breakdown, but nobody is watching. Motor Guard sits beside the starter panel, watches one motor around the clock and flags trouble early, so your team can fix it on a planned visit instead of in an emergency.
Inteligencia de instalaciones
Dónde funciona
Aquarium & pool life support
Circulation and filtration pumps that keep water moving and clean for fish, penguins and marine mammals.
Hatchery & pond aeration
Blowers and aerators that keep oxygen levels up in hatchery tanks, ponds and moats.
Animal-house climate & water supply
Exhaust fans and HVAC units behind reptile houses, aviaries and holding rooms, plus borewell pumps.
Qué hace
Pump running dry
Current and power factor drop while the motor is still on: lost prime or an empty sump.
Overload or jam
Current and motor temperature climb together: a blocked impeller or a dragging load.
Developing bearing wear
Vibration and temperature rise slowly against the motor's own healthy baseline.
Imbalance & looseness
Vibration jumps at running speed: a loose mount, misalignment or a damaged fan.
Unexpected stop
The starter is on but the motor draws nothing: a tripped overload, blown fuse or open winding.
Supply problems
Low or high mains voltage that makes motors run hot and wear out early.
Cómo funciona
Fit
Mount the unit beside the starter panel, clip the clamp around the motor cable and fix the sensor puck to the motor frame.
Watch
Motor Guard measures power, vibration and temperature around the clock and compares them with the motor's healthy baseline.
Warn
The health bar changes on the unit, and readings and alerts reach your team through the Antz App.
Por qué lo eligen los equipos
Repair on your schedule
Catch faults early and plan the fix, instead of a night-time call-out.
No rewiring
The current clamp clips around the existing cable. Nothing is cut or broken into.
Readable from the doorway
A health bar and status lights show the motor's state at a glance.
Your data stays on site
Readings go to your own gateway and the Antz App, with no cloud service.
Datos clave
- Monitors
- One single-phase 230 V pump, fan, blower or compressor
- Electrical
- Voltage, current, power, power factor, frequency, energy
- On the motor
- Vibration and frame temperature from a sealed sensor puck
- Current sensing
- Clamp-on split-core sensor, up to 100 A
- Extra inputs
- Shaft speed and starter (contactor) feedback
- On the unit
- Live-value display, 12-segment health bar and status lights
- Connectivity
- LoRaWAN (IN865) to the site gateway; Wi-Fi for set-up only
- Mounting
- Wall-mounted by the starter; puck by magnet or M8 stud
- Power
- From the supply ahead of the starter, so it stays on
- Safety
- Mains and low-voltage parts in separate compartments
Contenido de la caja
- Motor Guard unit
- Clamp-on current sensor
- Sensor puck with 1.5 m cable
- Magnet mount and M8 stud
- LoRa antenna
- Wall fixings
Funciona con
The Antz App for dashboards and alerts, through your site's LoRaWAN gateway.
Planning a pilot?
Tell us which pumps and fans matter most on your site, and we will plan a Motor Guard pilot around them.
Más en Inteligencia de instalaciones
Todos los dispositivos
Vea Antz Edge en acción
Reserve una demostración guiada. Le mostraremos un estudio de campo real, la anotación por voz en el momento y un modelo de visión artificial ejecutándose localmente en el propio dispositivo: entrenado con imágenes reales de cámaras por cuidadores y biólogos, comportamiento a comportamiento.
Hable con nosotros