Climat des habitats
ClimaCore Habitat Controller
Climate control for animal rooms: a safe relay box and a 7-inch touch panel.
Le défi
Frogs, reptiles and other sensitive species depend on misting, light and temperature being right, all day.
ClimaCore Habitat Controller
Many animal rooms still run lights, misters, pumps and foggers from separate timers, with no single view of what is happening and no warning when a probe fails. ClimaCore runs them all from one relay box with temperature probes in every vivarium and a touch panel at the door.
Habitat et environnement
Où l'utiliser
Amphibian & frog rooms
Misting and fogging on schedules and temperature rules for vivarium racks.
Reptile rooms
Light cycles and temperature-linked outputs for every vivarium in the room.
Nocturnal & quarantine rooms
Reversed light cycles, a dimmed screen and no buzzers near the animals.
Ce qu’il fait
Six switched channels
Two lighting, two misting, a pump and a fogger output, each with its own light.
Rules per channel
Intervals, time windows, temperature limits, run times and daily limits.
Five temperature probes
Four vivaria and the room, read all the time.
Fails safe
Rules pause on a dead probe, and outputs tied to temperature switch off if all are lost.
Back on after a power cut
Schedules catch up when power returns.
Keeps running alone
The relay box carries on with its rules even if the panel is offline.
Comment ça marche
Install
Mount the relay box and the touch panel, then connect lights, misters, pump and fogger.
Set
Place the probes and set schedules and temperature rules on the panel.
Control
ClimaCore switches each channel to its rules, day and night, and alerts on faults.
Pourquoi les équipes le choisissent
One view per room
Every output and probe on one 7-inch touch panel.
Warned, not surprised
Alerts on the panel and a status summary to staff phones.
Safety first
Mains switching stays in the relay box, away from the panel.
Easy for keepers
Manual override that returns to automatic after 30 minutes.
Points clés
- Outputs
- 6 fused 230 V channels: 2 light, 2 mist, pump, fogger
- Sensors
- 5 stainless temperature probes (4 vivaria + room)
- Panel
- 7-inch touch panel, powered from the relay box
- Panel link
- Wireless to the relay box, with a wired fallback
- Network
- Wi-Fi for set-up and alerts
- Indicators
- Channel lights, power, link and alert lights
- Power
- 230 V via the site's breaker and RCD
- Design
- Mains and low voltage in separate chambers; wipe-clean
Contenu de la boîte
- Relay box
- 7-inch touch panel
- 5 temperature probes
- Panel cable
- Wall fixings and drilling templates
Fonctionne avec
Pebble Climate Logger for room records, and Motor Guard for the pumps behind the room.
Planning a pilot?
Tell us about your animal rooms and species, and we will plan a ClimaCore layout.
Plus dans Habitat et environnement
Tous les appareils
Découvrez Antz Edge en action
Réservez une présentation. Nous vous montrerons une étude de terrain réelle, l’annotation vocale en direct et un modèle de vision par ordinateur fonctionnant localement en périphérie : entraîné sur de vrais flux de caméras par des soigneurs et des biologistes, comportement après comportement.
Parlez-nous