Intelligente Bewässerung

Smart Valve Node

A solar, wireless valve controller shaped like the hand-wheel it replaces.

Die Herausforderung

Opening and closing valves by hand across a large site takes hours of walking every day.

Smart Valve Node

Misting, irrigation and water features are spread across enclosures and landscapes, and every change means a trip to the valve. The Smart Valve Node runs up to four valves from one solar-powered unit, takes its orders from the site controller over LoRaWAN and still works by hand with a magnet key.


Wasser & Aquatik

Einsatzbereiche

01

Enclosure misting & irrigation

Humidity and watering for animal enclosures, on schedule or on demand.

02

Landscape & lawn zones

Zones across a large campus run from one place instead of by hand.

03

Polyhouses & nurseries

Watering for plant houses and nursery beds, set and checked remotely.

Was es kann

Up to four valves

Opens and closes latching DC solenoid valves on command from the site controller.

Hand override

Hold the magnet key on OPEN or CLOSE, even if the controller is down.

Fails safe

Closes its valves if it loses contact with the controller, and again after a restart.

Never strands a valve open

It will not open a valve unless the battery can close it again.

Flow & leak watch

Counts flow while valves are open and flags flow when they are all closed.

Keeps valves healthy

Checks each valve coil and exercises idle valves so they do not seize.


So funktioniert es

1

Fit

Mount the node on a pole beside the valve chamber, or inside it, and connect up to four valves.

2

Link

It joins the site controller over LoRaWAN, powered by its own solar panel.

3

Run

Valves open and close on schedule or on command, or by hand with the magnet key.

Warum Teams sich dafür entscheiden

Less walking

Change valves across the site without visiting each one.

No power cable

Solar panel and battery: it goes wherever the valve is.

Safe by hand

The magnet key gives authorised staff a manual override.

Catches leaks

Flow readings show a burst pipe or a valve that did not close.


Wichtige Fakten

Valves
Up to 4 latching DC solenoid valves (9, 12 or 24 V)
Sensor inputs
Flow meter, rain gauge, dry contacts, 0–3 V and 4–20 mA
Sensor bus
SDI-12 for up to 10 field sensors
Connectivity
LoRaWAN (IN865) with an external antenna; no Wi-Fi
Power
5 W solar panel with a LiFePO4 battery pack
Battery change
Through the hub, without opening the electronics
Controls
Magnet key on OPEN and CLOSE marks; no exposed buttons
Mounting
Pole bracket with U-bolts, or a valve-chamber wall

Lieferumfang

  • Smart Valve Node with battery
  • Magnet key
  • 5 W solar panel and sun plate
  • Antenna
  • Pole bracket with U-bolts
  • Cable glands and blanking plugs

Funktioniert mit

The ANTZ site controller and gateway, plus flow meters, rain gauges and SDI-12 soil sensors.

Planning a pilot?

Tell us how your water is laid out, and we will plan where Smart Valve Nodes save the most walking.

Pilotprojekt planen

Mehr aus Wasser & Aquatik

Alle Geräte

Antz Systems

Antz Edge in Aktion erleben

Buchen Sie eine Vorführung. Wir zeigen Ihnen eine laufende Feldstudie, Sprachannotation in Echtzeit und ein Bilderkennungsmodell, das lokal direkt auf dem Gerät läuft: trainiert auf echten Kamerabildern von Tierpflegern und Biologen, Verhalten für Verhalten.

Sprechen Sie mit uns