Environmental monitoring
Pebble Climate Logger
A wireless temperature and humidity logger in a soft, pebble-shaped case.
The challenge
A room that drifts out of range overnight is often found only when the damage is done.
Pebble Climate Logger
Incubator rooms, cold stores and animal houses need steady conditions, but paper charts and spot checks leave long gaps. Pebble logs temperature and humidity around the clock on its own battery and reports over LoRaWAN, with no mains power or Wi-Fi needed.
Habitat & Environment
Where it works
Incubator rooms
Room conditions logged around the clock where eggs and chicks are kept.
Cold rooms & stores
Food and medicine stores watched for temperature drift.
Indoor animal houses
Temperature and humidity records for every house and holding room.
What it does
Temperature & humidity
Continuous readings from a plug-in probe.
Swap the sensor
One universal port also takes cable probes such as soil moisture or leaf wetness.
Battery powered
Runs on its own battery, so it goes where there is no socket.
Reports over LoRaWAN
Readings travel to the site gateway with no Wi-Fi.
Sealed but breathing
One O-ring seal and a membrane vent keep moisture out.
Off the wall
Stands clear of the wall on its bracket to cut wall heat from the reading.
How it works
Mount
Fix the bracket to a wall or pole and slide Pebble on until it locks.
Log
It measures temperature and humidity around the clock on battery power.
Review
Readings arrive over LoRaWAN for charts and records.
Why teams choose it
No more gaps
A continuous record instead of spot checks.
No Wi-Fi needed
LoRaWAN carries readings from any room.
One logger, many sensors
Swap the probe as your needs change.
Quick to install
Slides onto its bracket and locks: no cables to run.
Key facts
- Measures
- Temperature and humidity from a plug-in probe
- Sensor port
- Universal M16 port for probes, cable glands or a blank
- Connectivity
- LoRaWAN to the site gateway; no Wi-Fi
- Power
- Internal rechargeable battery pack
- Seal
- One-piece shell, single O-ring, membrane vent
- Mounting
- Dovetail wall or pole bracket with a hidden lock screw
- Size
- 74 × 50 × 150 mm
- Setting
- Indoor rooms: incubator, cold and animal rooms
In the box
- Pebble logger with battery
- Temperature and humidity probe
- Membrane vent (fitted)
- Wall or pole bracket and lock screw
- Wall screws and plugs
Works with
Hood Field Logger outdoors, on the same bracket, gateway and records.
Planning a pilot?
Tell us which rooms need watching, and we will plan a Pebble rollout.
More in Habitat & Environment
All devices
See Antz Edge in action
Book a walkthrough. We'll show you a working field study, voice annotation as it happens, and a computer-vision model running locally on-edge: trained on real camera feeds by keepers and biologists, behavior by behavior.
Talk to us